全部资讯

The positive electrode materials of lithium batteries include lithium cobalt oxide LiCoO2, ternary material NiMnCo, lithium manganate LiMn2O4 plus conductive agent and binder, which are coated on aluminum foil to form the positive electrode, and the negative electrode is layered graphite plus conductive agent and binder. On the foil base tape, nano-carbon has been used in the relatively advanced anode layered graphite particles so far.(Lithium - Ion Battery Equipment) 1. Slurrying: Mix the powdered positive and

At present, scientists are working to develop new batteries with stronger energy storage and longer life, especially to develop more suitable batteries in different fields, because no one battery can be applied to all fields. Scientists are working on developing new lithium batteries 1. Not long ago, Chinese scientists developed a lithium battery that can be used at minus 70 degrees Celsius. It is expected to be used in extremely cold regions of the earth and even in outer space in the future. According to th

Consumer electronics, automotive and grid storage are three industries where batteries are currently used. Lithium battery manufacturer Xiaobian refers to these three industries as the three major areas where people connect with batteries. Each field has different requirements for batteries, so the batteries used can also be very different. The development of traditional lithium battery pack technology is slow, and the space for further optimization is limited. The phone in your pocket needs a sturdy, safe ba

Lithium-ion batteries have been attracting attention since they were put into the market in 1991 because of their excellent functions such as high energy density and long life. It has become an integral part of the energy economy in the 21st century. However, there are still some urgent problems to be solved in the application of lithium-ion batteries in the field of large-scale batteries such as automobiles and energy storage, such as safety issues. The organic electrolyte of lithium-ion batteries is volatile, fla

Lithium-ion batteries are powering many appliances, from laptops to lawn mowers. But because of their reliance on flammable components, lithium-ion batteries tend to burn when damaged. Researchers at the University of Maryland, College Park have redesigned lithium-ion batteries to store more electricity while being less flammable. As the main component of lithium-ion batteries, the organic electrolyte commonly used in the electrolyte is a flammable material. There have been previous attempts to replace these org

Plane positioning of slitting equipment: In order to ensure that the slitter equipment is accurately positioned on the basis of the equipment, after the equipment is hoisted in place, a reference line should be hung according to the central target plate that has been set. For the suspension of the reference line, a whole steel wire with a diameter of 0.3～0.75mm should be selected according to the equipment installation accuracy requirements and the suspension span. The tension force is generally 40%～80% of the bre

PVC slitting machine is suitable for slitting thin materials such as non-woven fabrics, leather, plastics, environmental protection materials, etc. After adjusting the cutter distance mechanism by this machine, it can cut into the required round roll strips, then you know Is the PVC slitting machine used and maintained? The editor will explain it for you below.        1. The operator must grasp the plan of the gate hoist, the function of the inspection machine and the operation method

The paper separator is to rewind and cut the large-axis base paper into different specifications of paper for the production of napkins, facial tissues, etc. Do you know the technical points and advantages of the paper separator system? The editor will explain it for you below.  Technical points:  1. The overall slitting speed of the paper separator system is high, and it is the same as low-speed operation when operating in the weak magnetic area, with fast response and stable speed.  2. The t

After the laser cutting machine cuts the material, the finished product will occasionally show the phenomenon of crystal dots. There are two main reasons. One is that the raw material itself has crystal points, and the other is that dust is generated during the cutting process, and the dust is mixed into the subsequent processes. To solve these two problems, first start with the raw materials, pay attention to inspections when purchasing raw materials, and second, avoid the generation of crystal points when laser